1.25'' Universal Metallic Heat Shield Thermal Sleeve Insulator Wire Mug Cover Wrap Loom Tube Wire Hose Cover Shroud

Descroption:

Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

Features:

Convenient hook & loop designed edges
Withstands 500°F direct continuous/2000°F radiant heat
No need to remove wires and hoses
Easily trimed to length

Note:
Available in multiple lengths and diameters to fit: wiring, fuel lines, brake lines, intake tubes, pipes, spark plug wires, battery cables, A/C hoses, and more.
Rated for Moderate Heat:
Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Velcro fastener is about 325Fº)  Can be used in about 90% of the underhood area when installed.
For best results seal the sleeves at each end with adhesive foil tape, shrink tube or stainless steel cable ties. Sleeves are conductive always insulate electric terminals that it might come in contact with sleeves. To ensure a proper fit, allow extra room for bends   (for example: a 90º bend in a 3/4" tube will NOT fit in 3/4" I.D. Sleeve, In this case you would need 1" I.D. or higher)

*No installation Tool & No instruction is Included, Professional Installation is Recommended*

ALL items are Brand New unless stated otherwise on the listing. We sell DIY (Do It Yourself) Items with a few exceptions. We take no responsibility in teaching you how to install. Professional installation is strongly recommended.