Description:

Product name: Car Stickers

Material: pet reflective material

Size: 14*4cm

Usage:

1. Rub the sticker to ensure that the transfer tape adheres to the sticker correctly.

2. Clean and dry the required area. It is best to stick the sticker on a clean and smooth surface.

3. Slowly remove the wax backing to ensure that the sticker is always adhered to the transparent transfer belt

4. Carefully place the label in the desired area.

5. Rub the sticker from one side to the other to eliminate any bubbles.

6. Use an object similar to a credit card to ensure that the entire sticker is completely glued to the surface.

7. Slowly remove the transfer tape, making sure that there are no stickers left on the transfer tape.

8. Check for air bubbles. In most cases, bubbles can act on the edge of the sticker,

but if this is not the case, a pinhole will allow air to flow out, making it almost invisible.

Packing list:

1*Car Stickers

Note:

The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.