Description
Customer Reviews(0)

Item specifics

Brand Name Makerbase
Origin CN(Origin)
Item Type DRIVER
Model Number MKS TMC2208
Support Uart mode
feature super silent

Product Description

Packing List
5 * MKS TMC2208
5 * Heatsink
1 * fan

Overview:

Compared to the TMC2100 stepper motor driver module, TMC2208 driver module is with lower heat. The heat of TMC2208 in 0.8A with the equivalent effect of the TMC2100 heat in 0.5A , can be used interchangeably with the TMC2100.

Features:

Ultra quiet
Large heat sink,good heat dissipation
Support uart mode by set jumper caps instead of welding on mks gen_l V2.0,skr1.3/1.4,mks sgen_l.

Parameter:

Default current:0.88a
Max current:1.4a
Logic voltage:3.3v/5v
Input voltage:4.75v-36v
Microstep:up to 1/256
Mode:dir/step,uart

Microstep set:

Microstep setting (doesn't need MS2)
MS0	MS1	STEP
1	0	2
0	1	4
0	0	8
1	1	16

Driver current regulation:

Verf measures the voltage of Gnd and potentiometer middle.
Please DO NOT connect the motors when measuring the voltage, or it's easy to burn the drive.
Please connect the power supply when measuring voltage as well, do not connect only the USB power.
Please pay special attention to the direction, do not insert wrongly!

Driver current algorithm:

Notice:

Pay attention to the connection direction,do not reverse it.
The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change A4988.
Dir/step mode used in the printer control board, please pay attention to set the jumper cap MS1 MS2.