Item specifics
-
Brand Name
ANYSECU
-
Battery Capacity(mAh)
600mAh
-
Origin
CN(Origin)
-
Is_Display
Yes
-
Waterproof / Water-Resistant
No
-
Walkie Talkie Type
Portable
-
Maximum Range
5km-10km
-
Output Power(w)
>50w
-
Certification
NONE
-
Model Number
SW-102
-
Frequency Range
125-525Mhz
-
Dimensions
W76*H77*D35mm
-
Storage Channel
NA
-
Material
Plastic
-
color
Black
-
Measurable power range
1-120W
-
test range of V.S.W.R
1.00~19.9
-
Impedance
50 ohm
-
Insertion Loss
< 0.15dB(VHF)
< 0.25dB
-
Temperature
0 C~60 C
-
Auto Power Off
1-9 mins
-
Battery
3.7V 600mAh Li-ion Battery
-
weight
about 220G
Main features:
VSWR. Forward and reflected power direct readout, without any calibration. Maximum measurable power range up to 120W. low insertion loss (0.3 decibels or less) structure allows it to be permanently connected. Frequency counter function Visible operation: Frequency,Power,SWR,FW,RW **SL16 (N type) for measure handy radios**
Specification Frequency test range: 125-520MHz Measurable power range: 1-120W test range of V.S.W.R: 1.00~19.9 Impedance: 50Ω Insertion Loss: < 0.15dB(VHF) , < 0.25dB(UHF) Temperature: 0 C~60 C Auto Power Off: 1-9 mins Interface: (in and out)N-J Interface Battery: 3.7V 600mAh Li-ion Battery Charger in 5V (micro usb) Volume: W76*H77*D35mm Weight: <220 grams (***Not work with digital radio***)
How to use? Power ON/OFF: Press 2 second the [Red button] to power on & power off; Connect the Output of your transceiver to "TX" and Antenna or dummy Load to "ANT". Proper adaptor/cable is required if your device has different type of connectors. (***must use dummy load to avoid burn tester & to get accurate result when test power)
Funtion menu display: 1) Adj. RF Forward % 2) Adj. RF Reward % 3) Adj. frequency counter time base. 4) Adj. RF Power % 5) Adj LCD dim of light 6)Adj. power off time 7)Adj. Powe test mode [0 for 1-10W hand held radio , 5 for Mobile Radio 10-100W]
Funtion Memory/ SAVE: 1. Press MENU [Blue button] 2. Press F1 [Red button] [Select 1-6 Funtion] 3. Press Blue button [- ], Yellow button [+] 4. Press the Red button for 2 seconds 5. Press the Blue button to SAVE and Exit
MENU SETTING 1: RF Level of" Forward ": [-99 to +99] % 2: RF Level of "Reverse": [-99 to +99] % 3: Freq.counter"Time Base: [-99 to +99]% 4: Finr tune RF "Power Watt Level": [-99 to +99] % 5: LCD DIM [LCD Backlight Time]: "0" is ON, "1-9" mins 6: POWER OFF: "0" is ON, "1-9" mins
Notice :SW-102 is not for DMR system
    

Standard package: 1*SURECOM SW-102 SL16[N-J type] 1*USB adaptor 100-240V 1*USB Charger Cable 1*Manual in EN
optional:
1*SL16-M to SMA-F 1*SL16-M to SMA-M
1*SL16-M to SO239 1*SL16-M to PL259
SURECOM SW-102 Q & A |
1. |
PLease charge with USB cable +5V , or come with PSU .
Push and hold on the "RED" botton .
Replacement battery when battery dead. (below Ver 5.1 use by 14500battery,V1.X use by li-ion polymer battery.
There are still problems with steps 1. and 2.and 3., please contact service center.
|
2. |
Some Radio problem when end of TX
.Radio output TX is not stabilizing.
|
3. |
SW-102 is not for DMR system
Don't not use the antenna get the watt data.
Please use the correct power dummy load to measure (must be 50 OHM)
The data read error when not read the frequency from radio
The TX input is weak
Input Watt below 0.5W
|
4. |
SW-102 is not for DMR system
Do not affect the test in the following cases, there are objects nearby
Do not affect the test in the following cases,placed horizontally.
|
5. |
SW-102 is not for DMR system
Input below 0.5W
Please use menu mode and fine tune the frequency offset.
|
6. |
Restart the SW-102
Remove the inside battery.
There are still problems with steps 1. and 2., please contact service center.
|
7. |
Off mode ,
Hold the Red button when the display show "restore to default "
There are still problems with steps 1. and 2., please remove the battery.
|
**All Specifications are subject to change without notice
|
|